Тефлоновый клей Premium Series, ткань с высококачественным покрытием PTFE
В серии тефлоновых клеев премиум-класса в качестве основной ткани используется высококачественная ткань с покрытием из ПТФЭ, после химической обработки одной стороны ПТФЭ на нее будет нанесен высококачественный силиконовый клей под давлением, который может выдерживать нагрев до 260 ° C и обеспечивать длительный срок службы.
На клейкую поверхность наносится желтая текстурированная антиадгезионная пленка из ПВХ, обеспечивающая простоту нанесения и защиту длительного срока службы свежего клея.
Свойства клейких тканей с покрытием из ПТФЭ
Тефлоновый клей содержит поверхность с антипригарным покрытием из PTFE и термостойкий клей, такой как силиконовый PSA или акриловый клей, которые обеспечивают легкое отсоединение, превосходную механическую прочность, длительный срок службы и стабильность размеров.
Лента с покрытием из ПТФЭ и силикона PSA – лучшее решение для приложений с высокими требованиями, которые требуют непрерывной и эффективной обработки, отличной прочности склеивания и долговечности при высоких температурах (до 500˚F / 260˚C).
Лента с покрытием из PTFE и силиконом PSA имеет следующие свойства.
★ Превосходная стабильность размеров и устойчивость к нагреванию.
★ Превосходное легкое разделение на пресс-форму, отличное антипригарное покрытие
★ непрерывная работа от -73 ° C до + 260 ° C
★ огнестойкий
★ Высокая диэлектрическая проницаемость
★ Хорошая механическая прочность
Технический паспорт клейкой ткани из ПТФЭ серии Premium
Товар | Категория продукта | Покрытие |
---|---|---|
СТЕКЛЯННАЯ ТКАНИ ИЗ ПТФЭ САМОКЛЕЯЩАЯСЯ | ПРЕМИУМ СЕРИЯ | СИЛИКОНОВЫЙ PSA |
Клейкая ткань из ПТФЭ серии Премиум | ||||||
---|---|---|---|---|---|---|
Стиль | Стандартная ширина (мм) Пожалуйста, запросите другую ширину | Толщина основы (mm) | Общая толщина (mm) | Масса (g/m2) | Клей (N/cm) | Деформация / заполнение прочности на разрыв (N/cm) |
YS7008AJ-ESONE | 1000, 1250 | 0.08 | 0.13 | 155 | 4.4 | 104/98 |
YS7013AJ-ESONE | 1000, 1250 | 0.13 | 0.18 | 270 | 5.4 | 240/200 |
YS7015AJ-ESONE | 1000 | 0.15 | 0.20 | 316 | 5.6 | 240/200 |
YS7018AJ-ESONE | 1000 | 0.18 | 0.23 | 370 | 5.6 | 320/302 |
YS7020AJ-ESONE | 1000 | 0.20 | 0.25 | 410 | 5.7 | 280/256 |
YS7025AJ-ESONE | 1000 | 0.25 | 0.30 | 530 | 6.0 | 460/400 |
YS7030AJ-ESONE | 1000 | 0.30 | 0.35 | 625 | 6.2 | 680/640 |
Применение тефлонового клея
Основные области применения: упаковка (термосварка, термоусадка, производство пластиковых пакетов), сварка окон и дверей из ПВХ, обработка пластика и полимеров (ламинирование, отверждение, экструзия, литье, вулканизация), обработка древесины и ламинирование, текстиль, электроника (электрическая). изоляция, обертывание кабелей, производство FPCB), автомобилестроение, авиакосмическая промышленность (выпуск пресс-форм, обертывание кабелей) и так далее.
Производство авиационных композитов ESONE PTFE coated fabric is used in the manufacturing of composite aircraft components, like mold release tape, vacuum bagging bleeder cloths. Mold release tape is applied directly to the mold, allowing for a clean and easy release surface. And the porous PTFE fabric provides excellent release and is used as breather fabrics, allowing for air and volatiles to escape | |
Выпуск лопастей ветряных турбин This application also use PTFE porous fabric and PTFE adhesive fabric. We customize PTFE porous fabric with balanced porosity & release property, and has high mechanical strength. For PTFE adhesive fabric, our mold release tape is easy release and has high mechanical strength, so that it can be reused many times easily. | |
Производство автомобильных композитов -PTFE Release sheet for lightweight plastic/polymer processing like SMC, GMT and RMT. -PTFE Release sheet for lightweight automotive components like front ends, underbody trims, door carrier, parcel shelf and auto seat. -PTFE Release sheet with adhesive for vehicle cord fabric lamination. -PTFE Bleeder cloths and PTFE mold release tape for carbon fiber car hood. | |
Электрическая изоляция -Youngsun PTFE coated cloth is used for electrical insulation such as aerospace wire wrapping and electrical coil and phase insulation. -Our PTFE Fabric has excellent mechanical strength, high dielectric constant, strong chemical resistance and heat resistant to 500°F/260°C. -Youngsun PTFE fabrics are also used as linings for the coils of superconducting magnets in order for reducing noise and vibration. | |
Ламинирование FPCB CVL Youngsun PTFE coated fabrics are used as release liner for CVL (coverlay) lamination or quick lamination, since our material has high mechanical strength and offers excellent release and non-stick property. Excellent smooth, easy release and defect free PTFE fabric will maximum the output in FPCB manufacturing process. | |
Упаковка и пломбирование Youngsun PTFE belting is used as conveyor belt to prevent polyethylene film sticking on the surface. Our belt last long, offers quick replace and easy to use. Our belts for food packaging and sealing are available in tear resistant and porous versions for flexible packaging. | |
Производство полиэтиленовых пакетов Plastic bag is heat welded by high speed for sealing, and PTFE coated fabric or PTFE self adhesive fabric is a must use release sheet in this application. Youngsun tear resist fabric or adhesive tape is also available for this application. | |
Сварка окон и дверей из ПВХ PTFE coated fiberglass cloth has excellent no stick surface and can resist heat up to 260°C, which can prevent melted PVC from sticking on welding platens. ESONE's product is workable for all kinds of welding process, including RF and microwave systems. | |
Крашение или печать Due to the non stick surface of PTFE Adhesive Sheet, ESONE product is used in Dyeing industry, in order for offering heat resistant and non stick surface. | |
Маскирующие ленты для распыления пламени PTFE self adhesive fabric, silicone coated fiberglass, fiberglass adhesive tape is used for plasma flame spray masking application, due to the heat resistant property. Various color is available, and any width can be cut. |
Quote teflón foto seali g bag plástico
TICKNESS 0,15 mm